Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installing JabberCam problem !
09-19-2010, 05:18 PM,
#1
Installing JabberCam problem !
hi,
i was traing to install the script. i went over all yout instlation points from
here:
http://www.videosoftware.pro/forum/...rCam-CRC-4

but when i try to connect to the site it stuks when i type the name.

i ran a test here:
http://amirg.doserv.co.il/chat/jabbercam...?task=test

and you can see it say"Red5 OFF"
this is the relavent part of my config file:
// Flash media server settings (rtmfp or rtmp | values: Stratus or Red5)
$SERVER_TYPE = 'Stratus'; // 'Red5 or 'Stratus'

if($SERVER_TYPE == 'Red5') {
$DB_HOST = $RED5_DB_HOST;
$DB_USER = $RED5_DB_USER;
$DB_PASSWORD = $RED5_DB_PASSWORD;
$DB_DATABASE = $RED5_DB_DATABASE;
}

// Red5
$RED5_CONNECT_URL = 'rtmp://www.jabbercam.com/ChatrouletteApp'; // leave this
free, temporary resource or use your own
$RED5_CONNECT_URL_B1 = '';
$RED5_CONNECT_URL_B2 = '';
$RED5_CONNECT_MAIN_TIMEOUT = 30; // minutes

// Stratus
$DEVELOPER_KEY = "936ca57abff91d550b8f22ac-fd141db8dd8d"; // your Adobe
Stratus developer key obtained from Adobe (read INSTALL.txt)


i will be happy to send the full CONFIG file.

i was reading a lot in your site and didn't found anything, please help me.

---
Website:http://amirg.doserv.co.il/chat/
Reply
09-21-2010, 01:08 AM,
#2
RE: Installing JabberCam problem !
Please PM the whole config.php file
Reply
09-21-2010, 11:13 PM,
#3
RE: Installing JabberCam problem !
Your web service URL is not set, it should look like this ($WEB_SERVICE_URL around line 23):
Quote:$WEB_SERVICE_URL = "http://amirg.doserv.co.il/chat/jabbercam/functions.php";
Reply
10-09-2010, 07:35 AM,
#4
RE: Installing JabberCam problem !
I have a similar problem, I tried 'Stratus' and it connected, my database connection tests out fine, but when I try to log in to the public red5 server, it just spins and spins http://stage.omniweb.com/tony/randompeople/chat/

Here's the relevant portion of the config file:

// Back-en location (exact location of functions.php on your domain | http://www.your-domain.com/[folder]/jabbercam/functions.php
$WEB_SERVICE_URL = "http://stage.omniweb.com/tony/randompeople/chat/jabbercam/functions.php"; // http://www.your-domain.com/jabbe$

// Flash media server settings (rtmfp or rtmp | values: Stratus or Red5)
$SERVER_TYPE = 'Red5'; // 'Red5 or 'Stratus'

if($SERVER_TYPE == 'Red5') {
$DB_HOST = $RED5_DB_HOST;
$DB_USER = $RED5_DB_USER;
$DB_PASSWORD = $RED5_DB_PASSWORD;
$DB_DATABASE = $RED5_DB_DATABASE;
}

// Red5
$RED5_CONNECT_URL = 'rtmp://www.jabbercam.com/ChatrouletteApp'; // leave this free, temporary resource or use your own
$RED5_CONNECT_URL_B1 = '';
$RED5_CONNECT_URL_B2 = '';
$RED5_CONNECT_MAIN_TIMEOUT = 30;


Do you have any suggestion? thank you very much,
Joe
Reply
10-10-2010, 12:34 AM,
#5
RE: Installing JabberCam problem !
When you run the test (http://stage.omniweb.com/tony/randompeople/chat/jabbercam/admin.php?task=test), you can see the following:
Quote:database tables OK
Testing: ...
Red5 OK: rtmp://www.jabbercam.com/ChatrouletteApp
Stratus OFF
System folder OK

- Red5 OK and Stratus OFF means, you did configure your settings to work with Red5 not Stratus, to switch, just change this line in your config.php: $SERVER_TYPE = 'Red5'; to $SERVER_TYPE = 'Stratus';
- the reason why the system hangs after entering the user-name is that you are using a 4.0+ version and trying to connect to rtmp://www.jabbercam.com/ChatrouletteApp (ChatrouletteApp works with < 3.9 only)
- to use the system with Red5, your current configuration is OK, just change this line:
$RED5_CONNECT_URL = 'rtmp://www.jabbercam.com/ChatrouletteApp' and enter your own rtmp instead of rtmp://www.jabbercam.com/ChatrouletteApp
Reply
10-10-2010, 02:13 AM,
#6
RE: Installing JabberCam problem !
OK thank you - somehow I was not aware of this before:

(10-10-2010, 12:34 AM)JabberCam Wrote:  - the reason why the system hangs after entering the user-name is that you are using a 4.0+ version and trying to connect to rtmp://www.jabbercam.com/ChatrouletteApp (ChatrouletteApp works with < 3.9 only)

I'll try to get my own rtmp working when i have a chance later tonight, thanks again,
Joe
Reply
10-14-2010, 01:12 AM,
#7
RE: Installing JabberCam problem !
(09-19-2010, 05:18 PM)roycegracie Wrote:  hi,
i was traing to install the script. i went over all yout instlation points from
here:
http://www.videosoftware.pro/forum/...rCam-CRC-4

but when i try to connect to the site it stuks when i type the name.

i ran a test here:
http://amirg.doserv.co.il/chat/jabbercam...?task=test

and you can see it say"Red5 OFF"
this is the relavent part of my config file:
// Flash media server settings (rtmfp or rtmp | values: Stratus or Red5)
$SERVER_TYPE = 'Stratus'; // 'Red5 or 'Stratus'

if($SERVER_TYPE == 'Red5') {
$DB_HOST = $RED5_DB_HOST;
$DB_USER = $RED5_DB_USER;
$DB_PASSWORD = $RED5_DB_PASSWORD;
$DB_DATABASE = $RED5_DB_DATABASE;
}

// Red5
$RED5_CONNECT_URL = 'rtmp://www.jabbercam.com/ChatrouletteApp'; // leave this
free, temporary resource or use your own
$RED5_CONNECT_URL_B1 = '';
$RED5_CONNECT_URL_B2 = '';
$RED5_CONNECT_MAIN_TIMEOUT = 30; // minutes

// Stratus
$DEVELOPER_KEY = "936ca57abff91d550b8f22ac-fd141db8dd8d"; // your Adobe
Stratus developer key obtained from Adobe (read INSTALL.txt)


i will be happy to send the full CONFIG file.

i was reading a lot in your site and didn't found anything, please help me.

---
Website:http://amirg.doserv.co.il/chat/

$WEB_SERVICE_URL = "http://amirg.doserv.co.il/chat/jabbercam/functions.php";
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)